AE500S-P (70G) Laboratory high speed shear emulsifying machine

Technical parameters:

Type: AE500S-P ( 70G )

Rated voltage: AC220V

Rated frequency: 50/60Hz

Input power: 850W

Output power: 500W

Stirring shaft output torque: 178.0 N.cm

Work mode: S1 (continuous)

Operating state display: LED

Operating control mode: combined control knob

Speed adjusting range: 2000-14000RPM

Speed control type: stepless

Speed dynamic detection: YES

Speed memory function: YES

Overload protection function: YES

Work head maximum torque: 172.0 N.cm

Rotor maximum linear velocity: 18m/s

Work head material: stainless steel 304

Work head diameter: 70 mm

Minimum height immersed in liquid : 50mm

Maximum height immersed in liquid : 236mm

Standard configuration of stator: 5mm2  20mm2  50mm2

Stirring capacity : 500-40000ml

Stirring processing viscosity: 8000mPa.S

Allow environment temperature: ≤40℃

Allow relative humidity: ≤90%

Size: 215 * 310 * 720mm

Net Weight: 9.2kg

Gross weight: 11kg

Product introduction: 

AE500S-P( 70G ) laboratory high-shear emulsifying machine with compact structure series miniature high-speed motor driver, suitable for lab or pilot plant of low to medium and high viscosity liquid mixing, crushing particle material shearing emulsification in liquid medium. The machine working head, shear emulsifying by high speed motor and speed regulating controller, etc. Drive host adopt high quality engineering plastic and die casting aluminum alloy as the body, stable operation; Head is made of high quality stainless steel refining, experimental application domain is extensive; Running speed is controlled by microprocessor, instantly effective compensation because of load change and the power supply voltage fluctuation caused by the change of speed, constant speed and reliable; The built-in soft starting, automatic overload protection, protect the safety of the full load run continuously for a long time; Speed stepless adjustment, meet the experiment of stirring speed correction at any time.